6G-Flex Dielectric

Cat No:ELFM-0285

Description

Flexible low-loss dielectric elastomer for 3D printing conformal 6G antennas and wearable RF components with 450% elongation.

Datasheet

Inquiry

Basic Information

Material Base	TPE / Ceramic Mix
Primary Function	6G Flex Antenna
Volume Resistivity	> 10^16 Ω·cm
Dielectric Constant	3.0 @ 60GHz
Dissipation Factor	0.0015
Tensile Strength	12 MPa
Flexural Modulus	55 MPa
Elongation @ Break	4.5
Glass Transition (Tg)	-50°C
Heat Deflection Temp	N/A
Melting Point	210°C
Density	1.25 g/cm³
Diameter/Form	1.75mm
Printing Temp	225-245°C
Build Plate Temp	50°C
Layer Resolution	0.20mm
Thermal Conductivity	0.35 W/m·K
Shore Hardness	88A
Viscosity	N/A
UV Wavelength	N/A
Moisture Absorption	< 0.5%
Surface Finish	Matte White
Print Speed	20-35 mm/s
Nozzle Type	Brass
Shelf Life	18 Months

GET IT!

Eata 3DPrint: Your innovation partner for advanced 3D printing solutions, delivering cutting-edge services and materials to transform industries and drive progress.

For Research or Industrial Raw Materials, Not For Personal Medical Use!

Eata 3DPrint: Your innovation partner for advanced 3D printing solutions, delivering cutting-edge services and materials to transform industries and drive progress.

Quick Links

Subscribe to Our Newsletter

Top