Bio-Link Conduct.

Cat No:ELFM-0282

Description

Biocompatible GelMA ink with PEDOT:PSS for 3D bioprinting soft, electrically conductive scaffolds for neural tissue engineering and biosensors.

Datasheet

Inquiry

Basic Information

Material Base	GelMA / PEDOT:PSS
Primary Function	Neural Interface
Volume Resistivity	10^1 - 10^3 Ω·cm
Dielectric Constant	N/A
Dissipation Factor	N/A
Tensile Strength	1.5 MPa
Flexural Modulus	0.4 MPa
Elongation @ Break	2.5
Glass Transition (Tg)	N/A
Heat Deflection Temp	N/A
Melting Point	N/A
Density	1.05 g/cm³
Diameter/Form	Liquid/Ink
Printing Temp	N/A
Build Plate Temp	37°C
Layer Resolution	0.05mm
Thermal Conductivity	0.60 W/m·K
Shore Hardness	20A
Viscosity	4,500 cps
UV Wavelength	365-405nm
Moisture Absorption	> 90%
Surface Finish	Translucent Blue
Print Speed	N/A
Nozzle Type	Dispensing Tip
Shelf Life	3 Months

GET IT!

Eata 3DPrint: Your innovation partner for advanced 3D printing solutions, delivering cutting-edge services and materials to transform industries and drive progress.

For Research or Industrial Raw Materials, Not For Personal Medical Use!

Eata 3DPrint: Your innovation partner for advanced 3D printing solutions, delivering cutting-edge services and materials to transform industries and drive progress.

Quick Links

Subscribe to Our Newsletter

Top