| Technical Description | A tough, biocompatible raw material designed for indirect food contact and personal health tools requiring high impact strength and sterilization capability. |
| Base Polymer | PC-ISO |
| Density (g/cm3) | 1.2 |
| Tensile Strength (MPa) | 68 |
| Flexural Modulus (MPa) | 2350 |
| Elongation at Break (%) | 4.5 |
| Izod Impact Strength (J/m) | 500 |
| Glass Transition Temp (°C) | 147 |
| Melting Point (°C) | 265 |
| Printing Temp (°C) | 275 - 305 |
| Build Plate Temp (°C) | 110 - 130 |
| Thermal Conductivity (W/m⋅K) | 0.21 |
| Water Absorption (%) | 0.22 |
| Linear Mold Shrinkage (%) | 0.75 |
| Hardness (Shore D) | 84 |
| Odor Level | Low |
| Chemical Resistance | Moderate |
| UV Stability | High |
| Transparency Level | Translucent |
| Surface Tension (mN/m) | 44 |
| Recommended Speed (mm/s) | 20 - 45 |
| Layer Resolution (mm) | 0.10 - 0.25 |
| Shelf Life (Months) | 12 |
| Raw Material Diameter (mm) | 1.75 |
| Primary Application | Consumer Health Devices |
Eata 3DPrint: Your innovation partner for advanced 3D printing solutions, delivering cutting-edge services and materials to transform industries and drive progress.
For Research or Industrial Raw Materials, Not For Personal Medical Use!
|
There is no product in your cart. |
Eata 3DPrint: Your innovation partner for advanced 3D printing solutions, delivering cutting-edge services and materials to transform industries and drive progress.
Enter your E-mail and receive the latest news from us.
