Ceramic-Based Thermal Barrier Slurry

Cat No:PPFM-0005

Description

An advanced ceramic raw material slurry used to coat 3D printed parts for extreme heat protection. It forms a rigid thermal shield capable of resisting direct flame and high-heat environments.

Datasheet

Inquiry

Basic Information

Material State	Paste
Color	White
Viscosity (cP)	8000
Density (g/cm³)	2.1
Application Method	Trowel/Spray
Curing Mechanism	Sintering/Heat
Surface Tension (mN/m)	N/A
Thermal Stability	1400°C
Shore Hardness	90D
Contact Angle (Water)	N/A
Solubility	Water
Flash Point	Non-flammable
Shelf Life	24 Months
Storage Temp	10-35°C
Tensile Strength	12 MPa
Flexural Modulus	12 GPa
Elongation at Break	<1.0%
Refractive Index	N/A
Electrical Resistance	Insulator
Moisture Absorption	<0.1%
Biocompatibility	Biocompatible
Shrinkage Rate	<3.0%
Functional Group	Alumina/Silica

GET IT!

Eata 3DPrint: Your innovation partner for advanced 3D printing solutions, delivering cutting-edge services and materials to transform industries and drive progress.

For Research or Industrial Raw Materials, Not For Personal Medical Use!

Eata 3DPrint: Your innovation partner for advanced 3D printing solutions, delivering cutting-edge services and materials to transform industries and drive progress.

Quick Links

Subscribe to Our Newsletter

Top