Ceramic-Pro Ink

Cat No:ELFM-0269

Description

Pre-ceramic conductive ink that converts to a SiC-based ceramic after pyrolysis, used for 3D printing electrodes in micro-thrusters and jet sensors.

Datasheet

Inquiry

Basic Information

Material Base	Si-C Precursor
Primary Function	Propulsion Cond
Volume Resistivity	< 1.0 Ω·cm
Dielectric Constant	N/A
Dissipation Factor	N/A
Tensile Strength	65 MPa*
Flexural Modulus	35 GPa*
Elongation @ Break	0.015
Glass Transition (Tg)	N/A
Heat Deflection Temp	1,400°C*
Melting Point	N/A
Density	2.35 g/cm³
Diameter/Form	Paste/Ink
Printing Temp	N/A
Build Plate Temp	150°C
Layer Resolution	0.02mm
Thermal Conductivity	8.5 W/m·K
Shore Hardness	90D+
Viscosity	62,000 cps
UV Wavelength	N/A
Moisture Absorption	< 0.05%
Surface Finish	Matte Grey
Print Speed	N/A
Nozzle Type	Dispensing Tip
Shelf Life	12 Months

GET IT!

Eata 3DPrint: Your innovation partner for advanced 3D printing solutions, delivering cutting-edge services and materials to transform industries and drive progress.

For Research or Industrial Raw Materials, Not For Personal Medical Use!

Eata 3DPrint: Your innovation partner for advanced 3D printing solutions, delivering cutting-edge services and materials to transform industries and drive progress.

Quick Links

Subscribe to Our Newsletter

Top