Cat No:SSM-0014
Description
Cold-water soluble support optimized for low-temperature printing to prevent thermal distortion in biologically active or sensitive resins.
| Base Material | Specialized Polyester |
| Solubility Method | Water |
| Solvent Type | Cold Water |
| Heat Deflection Temp (0.45MPa) | 55 |
| Glass Transition Temp (Tg) | 60 |
| Melting Point (°C) | 155 |
| Density (g/cm³) | 1.24 |
| Water Absorption (%) | 40 |
| Tensile Strength (MPa) | 28 |
| Tensile Modulus (MPa) | 1100 |
| Elongation at Break (%) | 400 |
| Flexural Strength (MPa) | 45 |
| Flexural Modulus (MPa) | 1000 |
| Printing Temp (°C) | 185-210 |
| Bed Temp (°C) | 40-60 |
| Chamber Temp (°C) | - |
| Fan Speed (%) | 100 |
| Nozzle Type | Brass |
| Layer Height (mm) | 0.2 |
| Shrinkage Rate (%) | 0.5 |
| Continuous Use Temp (°C) | 45 |
| Impact Strength (kJ/m²) | 5.5 |
| Flame Retardancy (UL94) | HB |
| Surface Resistivity (Ω) | 10^13 |
Eata 3DPrint: Your innovation partner for advanced 3D printing solutions, delivering cutting-edge services and materials to transform industries and drive progress.
For Research or Industrial Raw Materials, Not For Personal Medical Use!
|
There is no product in your cart. |
Eata 3DPrint: Your innovation partner for advanced 3D printing solutions, delivering cutting-edge services and materials to transform industries and drive progress.
Enter your E-mail and receive the latest news from us.