Dielectric TPE-K

Cat No:ELFM-0222

Description

High-permittivity flexible elastomer filament for 3D printing stretchable microwave antennas and dielectric elastomer actuators (DEAs).

Datasheet

Inquiry

Basic Information

Material Base	TPE / SrTiO3 Nano
Primary Function	Soft Antenna
Volume Resistivity	> 10^15 Ω·cm
Dielectric Constant	10.5 @ 10GHz
Dissipation Factor	0.008
Tensile Strength	15 MPa
Flexural Modulus	65 MPa
Elongation @ Break	4.8
Glass Transition (Tg)	-50°C
Heat Deflection Temp	N/A
Melting Point	195°C
Density	1.95 g/cm³
Diameter/Form	1.75mm
Printing Temp	210-235°C
Build Plate Temp	50°C
Layer Resolution	0.20mm
Thermal Conductivity	0.42 W/m·K
Shore Hardness	82A
Viscosity	N/A
UV Wavelength	N/A
Moisture Absorption	< 0.6%
Surface Finish	Matte White
Print Speed	25-45 mm/s
Nozzle Type	Brass
Shelf Life	18 Months

GET IT!

Eata 3DPrint: Your innovation partner for advanced 3D printing solutions, delivering cutting-edge services and materials to transform industries and drive progress.

For Research or Industrial Raw Materials, Not For Personal Medical Use!

Eata 3DPrint: Your innovation partner for advanced 3D printing solutions, delivering cutting-edge services and materials to transform industries and drive progress.

Quick Links

Subscribe to Our Newsletter

Top