Cat No:EFM-0010
Description
This UV resin offers a perfect balance of elongation and tear strength, suited for repeated bending cycles in flexible enclosures and impact-absorbing pads.
| Material Category | Elastomeric Resin |
| Tensile Strength | 18.5 MPa |
| Elongation at Break | 2.4 |
| Hardness (Shore) | 80A |
| Tear Strength | 45 kN/m |
| Glass Transition (Tg) | -5°C |
| Viscosity (@25°C) | 750 cps |
| Density | 1.12 g/cm³ |
| Water Absorption | 0.008 |
| Flexural Modulus | 55 MPa |
| Shrinkage Rate | 0.012 |
| Color Options | Translucent Grey |
| Compression Set | 0.15 |
| Resilience | 0.5 |
| Izod Impact | Non-break |
| Melting Point | N/A |
| Storage Temp | 18-28°C |
| Curing Wavelength | 405nm |
| Layer Thickness | 0.05-0.1mm |
| Solubility | Insoluble |
| Abrasion Resistance | Good |
| Thermal Stability | 85°C |
| Odor Level | Low |
| Bio-compatibility | General use |
| Compatible Tech | LCD/DLP |
Eata 3DPrint: Your innovation partner for advanced 3D printing solutions, delivering cutting-edge services and materials to transform industries and drive progress.
For Research or Industrial Raw Materials, Not For Personal Medical Use!
|
There is no product in your cart. |
Eata 3DPrint: Your innovation partner for advanced 3D printing solutions, delivering cutting-edge services and materials to transform industries and drive progress.
Enter your E-mail and receive the latest news from us.