| Technical Description | A hypoallergenic, bio-derived thermoplastic elastomer with extreme soft-touch properties, perfect for ergonomic infant care and sensitive consumer grips. |
| Base Polymer | Bio-TPE (55A) |
| Density (g/cm3) | 1.12 |
| Tensile Strength (MPa) | 10 |
| Flexural Modulus (MPa) | 15 |
| Elongation at Break (%) | >750 |
| Izod Impact Strength (J/m) | No Break |
| Glass Transition Temp (°C) | -55 |
| Melting Point (°C) | 160 |
| Printing Temp (°C) | 210 - 235 |
| Build Plate Temp (°C) | 0 - 35 |
| Thermal Conductivity (W/m⋅K) | 0.13 |
| Water Absorption (%) | 1.15 |
| Linear Mold Shrinkage (%) | 2.1 |
| Hardness (Shore D) | 55A |
| Odor Level | Neutral |
| Chemical Resistance | Detergent Safe |
| UV Stability | High |
| Transparency Level | Translucent |
| Surface Tension (mN/m) | 29 |
| Recommended Speed (mm/s) | 15 - 30 |
| Layer Resolution (mm) | 0.20 - 0.40 |
| Fan Cooling (%) | 15 |
| Shelf Life (Months) | 24 |
| Raw Material Diameter (mm) | 1.75 |
| Primary Application | Baby Teether Prototypes |
Eata 3DPrint: Your innovation partner for advanced 3D printing solutions, delivering cutting-edge services and materials to transform industries and drive progress.
For Research or Industrial Raw Materials, Not For Personal Medical Use!
|
There is no product in your cart. |
Eata 3DPrint: Your innovation partner for advanced 3D printing solutions, delivering cutting-edge services and materials to transform industries and drive progress.
Enter your E-mail and receive the latest news from us.
