FSS Selective Resin

Cat No:ELFM-0085

Description

Ultra-low loss photopolymer specifically designed for 3D printing Frequency Selective Surfaces (FSS) and high-frequency microwave filters.

Datasheet

Inquiry

Basic Information

Material Base	Fluorinated Acrylate
Primary Function	Signal Filtering
Volume Resistivity	> 10^16 Ω·cm
Dielectric Constant	2.4 @ 20GHz
Dissipation Factor	0.0008
Tensile Strength	42 MPa
Flexural Modulus	2,100 MPa
Elongation @ Break	0.15
Glass Transition (Tg)	105°C
Heat Deflection Temp	85°C
Melting Point	N/A
Density	1.18 g/cm³
Diameter/Form	Liquid
Printing Temp	N/A
Build Plate Temp	N/A
Layer Resolution	0.025mm
Thermal Conductivity	0.20 W/m·K
Shore Hardness	76D
Viscosity	400 cps
UV Wavelength	385-405nm
Moisture Absorption	< 0.05%
Surface Finish	Clear
Print Speed	3.5s / layer
Nozzle Type	N/A
Shelf Life	12 Months

GET IT!

Eata 3DPrint: Your innovation partner for advanced 3D printing solutions, delivering cutting-edge services and materials to transform industries and drive progress.

For Research or Industrial Raw Materials, Not For Personal Medical Use!

Eata 3DPrint: Your innovation partner for advanced 3D printing solutions, delivering cutting-edge services and materials to transform industries and drive progress.

Quick Links

Subscribe to Our Newsletter

Top