| Technical Description | A 100% bio-sourced Nylon 11 raw material reinforced with glass fibers, providing exceptional dimensional stability and impact resistance for consumer outdoor gear. |
| Base Polymer | Polyamide 11 + 25% GF |
| Density (g/cm3) | 1.24 |
| Tensile Strength (MPa) | 85 |
| Flexural Modulus (MPa) | 6200 |
| Elongation at Break (%) | 5 |
| Izod Impact Strength (J/m) | 110 |
| Glass Transition Temp (°C) | 45 |
| Melting Point (°C) | 190 |
| Printing Temp (°C) | 260 - 285 |
| Build Plate Temp (°C) | 85 - 105 |
| Thermal Conductivity (W/m⋅K) | 0.38 |
| Water Absorption (%) | 0.18 |
| Linear Mold Shrinkage (%) | 0.25 |
| Hardness (Shore D) | 82 |
| Odor Level | None |
| Chemical Resistance | Superior |
| UV Stability | High |
| Transparency Level | Opaque |
| Surface Tension (mN/m) | 43 |
| Recommended Speed (mm/s) | 30 - 50 |
| Layer Resolution (mm) | 0.10 - 0.25 |
| Shelf Life (Months) | 24 |
| Raw Material Diameter (mm) | 1.75 |
| Primary Application | High-Load Sporting Gear |
Eata 3DPrint: Your innovation partner for advanced 3D printing solutions, delivering cutting-edge services and materials to transform industries and drive progress.
For Research or Industrial Raw Materials, Not For Personal Medical Use!
|
There is no product in your cart. |
Eata 3DPrint: Your innovation partner for advanced 3D printing solutions, delivering cutting-edge services and materials to transform industries and drive progress.
Enter your E-mail and receive the latest news from us.
