| Technical Description | A chemically inert and moisture-proof raw material widely used in the production of milk jugs and consumer liquid containers, now optimized for 3D printing. |
| Base Polymer | HDPE |
| Density (g/cm3) | 0.95 |
| Tensile Strength (MPa) | 25 |
| Flexural Modulus (MPa) | 1100 |
| Elongation at Break (%) | 500 |
| Izod Impact Strength (J/m) | No Break |
| Glass Transition Temp (°C) | -110 |
| Melting Point (°C) | 130 |
| Printing Temp (°C) | 230 - 260 |
| Build Plate Temp (°C) | 100 - 120 |
| Thermal Conductivity (W/m⋅K) | 0.44 |
| Water Absorption (%) | <0.01 |
| Linear Mold Shrinkage (%) | 2.5 |
| Hardness (Shore D) | 65 |
| Odor Level | Plastic |
| Chemical Resistance | Universal |
| UV Stability | High |
| Transparency Level | Translucent |
| Surface Tension (mN/m) | 32 |
| Recommended Speed (mm/s) | 20 - 40 |
| Layer Resolution (mm) | 0.20 - 0.35 |
| Shelf Life (Months) | 36 |
| Raw Material Diameter (mm) | 1.75 / Pellets |
| Primary Application | Bulk Liquid Containers |
Eata 3DPrint: Your innovation partner for advanced 3D printing solutions, delivering cutting-edge services and materials to transform industries and drive progress.
For Research or Industrial Raw Materials, Not For Personal Medical Use!
|
There is no product in your cart. |
Eata 3DPrint: Your innovation partner for advanced 3D printing solutions, delivering cutting-edge services and materials to transform industries and drive progress.
Enter your E-mail and receive the latest news from us.
