High-K Epoxy Ink

Cat No:ELFM-0154

Description

High-permittivity epoxy ink for 3D dispensing, optimized for fabricating custom micro-capacitors and dielectric layers in embedded electronics.

Datasheet

Inquiry

Basic Information

Material Base	Epoxy / BaTiO3
Primary Function	Micro-Capacitor
Volume Resistivity	> 10^14 Ω·cm
Dielectric Constant	18.0 @ 1MHz
Dissipation Factor	0.02
Tensile Strength	35 MPa
Flexural Modulus	2,100 MPa
Elongation @ Break	0.03
Glass Transition (Tg)	135°C
Heat Deflection Temp	115°C
Melting Point	N/A
Density	1.95 g/cm³
Diameter/Form	Paste/Ink
Printing Temp	N/A
Build Plate Temp	100°C
Layer Resolution	0.01mm
Thermal Conductivity	0.65 W/m·K
Shore Hardness	82D
Viscosity	52,000 cps
UV Wavelength	N/A
Moisture Absorption	< 0.1%
Surface Finish	Matte White
Print Speed	N/A
Nozzle Type	Dispensing Tip
Shelf Life	6 Months

GET IT!

Eata 3DPrint: Your innovation partner for advanced 3D printing solutions, delivering cutting-edge services and materials to transform industries and drive progress.

For Research or Industrial Raw Materials, Not For Personal Medical Use!

Eata 3DPrint: Your innovation partner for advanced 3D printing solutions, delivering cutting-edge services and materials to transform industries and drive progress.

Quick Links

Subscribe to Our Newsletter

Top