Cat No:SSM-0054
Description
Ultra-brittle support material formulated for "instant-snap" removal, leaving zero scarring on the primary part surface.
| Base Material | Modified Polystyrene |
| Solubility Method | Mechanical |
| Solvent Type | None (Instant Break) |
| Heat Deflection Temp (0.45MPa) | 92 |
| Glass Transition Temp (Tg) | 100 |
| Melting Point (°C) | 220 |
| Density (g/cm³) | 1.05 |
| Water Absorption (%) | 0.03 |
| Tensile Strength (MPa) | 35 |
| Tensile Modulus (MPa) | 2400 |
| Elongation at Break (%) | 1 |
| Flexural Strength (MPa) | 72 |
| Flexural Modulus (MPa) | 2200 |
| Printing Temp (°C) | 230-250 |
| Bed Temp (°C) | 90-110 |
| Chamber Temp (°C) | 50 |
| Nozzle Type | Hardened Steel |
| Layer Height (mm) | 0.15 |
| Shrinkage Rate (%) | 0.35 |
| Continuous Use Temp (°C) | 85 |
| Impact Strength (kJ/m²) | 2 |
| Flame Retardancy (UL94) | HB |
| Surface Resistivity (Ω) | 10^15 |
Eata 3DPrint: Your innovation partner for advanced 3D printing solutions, delivering cutting-edge services and materials to transform industries and drive progress.
For Research or Industrial Raw Materials, Not For Personal Medical Use!
|
There is no product in your cart. |
Eata 3DPrint: Your innovation partner for advanced 3D printing solutions, delivering cutting-edge services and materials to transform industries and drive progress.
Enter your E-mail and receive the latest news from us.