Low-Loss PTFE-PPS

Cat No:ELFM-0183

Description

High-performance PPS/PTFE blend for 3D printing low-loss RF filter housings and antenna radomes with superior chemical and heat resistance.

Datasheet

Inquiry

Basic Information

Material Base	PPS / PTFE Blend
Primary Function	5G RF Housing
Volume Resistivity	> 10^17 Ω·cm
Dielectric Constant	2.8 @ 28GHz
Dissipation Factor	0.0015
Tensile Strength	72 MPa
Flexural Modulus	4,200 MPa
Elongation @ Break	0.04
Glass Transition (Tg)	90°C
Heat Deflection Temp	165°C
Melting Point	285°C
Density	1.58 g/cm³
Diameter/Form	1.75mm
Printing Temp	320-350°C
Build Plate Temp	120°C
Layer Resolution	0.15mm
Thermal Conductivity	0.42 W/m·K
Shore Hardness	86D
Viscosity	N/A
UV Wavelength	N/A
Moisture Absorption	< 0.05%
Surface Finish	Opaque White
Print Speed	25-45 mm/s
Nozzle Type	Hardened Steel
Shelf Life	24 Months

GET IT!

Eata 3DPrint: Your innovation partner for advanced 3D printing solutions, delivering cutting-edge services and materials to transform industries and drive progress.

For Research or Industrial Raw Materials, Not For Personal Medical Use!

Eata 3DPrint: Your innovation partner for advanced 3D printing solutions, delivering cutting-edge services and materials to transform industries and drive progress.

Quick Links

Subscribe to Our Newsletter

Top