Cat No:SSM-0135
Description
Ultra-low viscosity gel for micro-fluidic channel creation; flows easily into tiny geometries and dissolves instantly in warm water.
| Base Material | Modified Poly-Ether |
| Solubility Method | Water |
| Solvent Type | Warm Water |
| Heat Deflection Temp (0.45MPa) | 20 |
| Glass Transition Temp (Tg) | - |
| Melting Point (°C) | - |
| Density (g/cm³) | 1.05 |
| Water Absorption (%) | 90 |
| Tensile Strength (MPa) | 5 |
| Tensile Modulus (MPa) | 150 |
| Elongation at Break (%) | 500 |
| Flexural Strength (MPa) | 8 |
| Flexural Modulus (MPa) | 120 |
| Printing Temp (°C) | 40-70 |
| Bed Temp (°C) | 20-40 |
| Chamber Temp (°C) | - |
| Nozzle Type | Brass |
| Layer Height (mm) | 0.05 |
| Shrinkage Rate (%) | 2.5 |
| Continuous Use Temp (°C) | 20 |
| Impact Strength (kJ/m²) | 1 |
| Flame Retardancy (UL94) | HB |
| Surface Resistivity (Ω) | 10^12 |
Eata 3DPrint: Your innovation partner for advanced 3D printing solutions, delivering cutting-edge services and materials to transform industries and drive progress.
For Research or Industrial Raw Materials, Not For Personal Medical Use!
|
There is no product in your cart. |
Eata 3DPrint: Your innovation partner for advanced 3D printing solutions, delivering cutting-edge services and materials to transform industries and drive progress.
Enter your E-mail and receive the latest news from us.