| Technical Description | A high-durability raw material sourced from castor oil, offering lower moisture absorption than traditional nylon for long-lasting consumer kitchen tools. |
| Base Polymer | Nylon 6/10 (Bio-Source) |
| Density (g/cm3) | 1.08 |
| Tensile Strength (MPa) | 52 |
| Flexural Modulus (MPa) | 1950 |
| Elongation at Break (%) | 180 |
| Izod Impact Strength (J/m) | 120 |
| Glass Transition Temp (°C) | 50 |
| Melting Point (°C) | 215 |
| Printing Temp (°C) | 245 - 270 |
| Build Plate Temp (°C) | 80 - 100 |
| Thermal Conductivity (W/m⋅K) | 0.22 |
| Water Absorption (%) | 0.35 |
| Linear Mold Shrinkage (%) | 1.15 |
| Hardness (Shore D) | 74 |
| Odor Level | Neutral |
| Chemical Resistance | Grease/Oil Res. |
| UV Stability | High |
| Transparency Level | Translucent |
| Surface Tension (mN/m) | 39 |
| Recommended Speed (mm/s) | 30 - 50 |
| Layer Resolution (mm) | 0.15 - 0.25 |
| Shelf Life (Months) | 24 |
| Raw Material Diameter (mm) | 1.75 |
| Primary Application | Kitchen Gear Handles |
Eata 3DPrint: Your innovation partner for advanced 3D printing solutions, delivering cutting-edge services and materials to transform industries and drive progress.
For Research or Industrial Raw Materials, Not For Personal Medical Use!
|
There is no product in your cart. |
Eata 3DPrint: Your innovation partner for advanced 3D printing solutions, delivering cutting-edge services and materials to transform industries and drive progress.
Enter your E-mail and receive the latest news from us.
