| Technical Description | A high-temperature self-lubricating nylon raw material designed for continuous operation in high-friction consumer appliance gearboxes. |
| Base Polymer | Polyamide 46 + MoS2 |
| Density (g/cm3) | 1.18 |
| Tensile Strength (MPa) | 95 |
| Flexural Modulus (MPa) | 3300 |
| Elongation at Break (%) | 25 |
| Izod Impact Strength (J/m) | 90 |
| Glass Transition Temp (°C) | 75 |
| Melting Point (°C) | 295 |
| Printing Temp (°C) | 300 - 325 |
| Build Plate Temp (°C) | 100 - 120 |
| Thermal Conductivity (W/m⋅K) | 0.3 |
| Water Absorption (%) | 1.1 |
| Linear Mold Shrinkage (%) | 1.15 |
| Hardness (Shore D) | 84 |
| Odor Level | Neutral |
| Chemical Resistance | Excellent |
| UV Stability | Moderate |
| Transparency Level | Opaque (Grey) |
| Surface Tension (mN/m) | 44 |
| Recommended Speed (mm/s) | 25 - 45 |
| Layer Resolution (mm) | 0.10 - 0.20 |
| Shelf Life (Months) | 18 |
| Raw Material Diameter (mm) | 1.75 |
| Primary Application | High-Heat Blender Gears |
Eata 3DPrint: Your innovation partner for advanced 3D printing solutions, delivering cutting-edge services and materials to transform industries and drive progress.
For Research or Industrial Raw Materials, Not For Personal Medical Use!
|
There is no product in your cart. |
Eata 3DPrint: Your innovation partner for advanced 3D printing solutions, delivering cutting-edge services and materials to transform industries and drive progress.
Enter your E-mail and receive the latest news from us.
