| Technical Description | A carbon-fiber reinforced copolyester raw material providing extreme stiffness and a premium matte finish for structural consumer retail displays. |
| Base Polymer | PETG + Carbon Fiber |
| Density (g/cm3) | 1.32 |
| Tensile Strength (MPa) | 65 |
| Flexural Modulus (MPa) | 4800 |
| Elongation at Break (%) | 4 |
| Izod Impact Strength (J/m) | 90 |
| Glass Transition Temp (°C) | 80 |
| Melting Point (°C) | 235 |
| Printing Temp (°C) | 240 - 265 |
| Build Plate Temp (°C) | 75 - 95 |
| Thermal Conductivity (W/m⋅K) | 0.42 |
| Water Absorption (%) | 0.12 |
| Linear Mold Shrinkage (%) | 0.15 |
| Hardness (Shore D) | 80 |
| Odor Level | None |
| Chemical Resistance | Good |
| UV Stability | High |
| Transparency Level | Opaque (Black) |
| Surface Tension (mN/m) | 48 |
| Recommended Speed (mm/s) | 30 - 60 |
| Layer Resolution (mm) | 0.10 - 0.25 |
| Fan Cooling (%) | 40 |
| Shelf Life (Months) | 24 |
| Raw Material Diameter (mm) | 1.75 |
| Primary Application | High-End Retail Frames |
Eata 3DPrint: Your innovation partner for advanced 3D printing solutions, delivering cutting-edge services and materials to transform industries and drive progress.
For Research or Industrial Raw Materials, Not For Personal Medical Use!
|
There is no product in your cart. |
Eata 3DPrint: Your innovation partner for advanced 3D printing solutions, delivering cutting-edge services and materials to transform industries and drive progress.
Enter your E-mail and receive the latest news from us.
