| Technical Description | A specialized glass-reinforced high-performance raw material visible under safety scanners, designed for structural tools in commercial food lines. |
| Base Polymer | PEI + 10% GF + Ferrite |
| Density (g/cm3) | 1.55 |
| Tensile Strength (MPa) | 115 |
| Flexural Modulus (MPa) | 4500 |
| Elongation at Break (%) | 15 |
| Izod Impact Strength (J/m) | 80 |
| Glass Transition Temp (°C) | 217 |
| Melting Point (°C) | 340 |
| Printing Temp (°C) | 360 - 395 |
| Build Plate Temp (°C) | 130 - 160 |
| Thermal Conductivity (W/m⋅K) | 0.38 |
| Water Absorption (%) | 0.25 |
| Linear Mold Shrinkage (%) | 0.45 |
| Hardness (Shore D) | 88 |
| Odor Level | None |
| Chemical Resistance | Exceptional |
| UV Stability | Superior |
| Transparency Level | Opaque (Blue) |
| Surface Tension (mN/m) | 45 |
| Recommended Speed (mm/s) | 15 - 30 |
| Layer Resolution (mm) | 0.10 - 0.20 |
| Shelf Life (Months) | 48 |
| Raw Material Diameter (mm) | 1.75 |
| Primary Application | High-Load Food Sorters |
Eata 3DPrint: Your innovation partner for advanced 3D printing solutions, delivering cutting-edge services and materials to transform industries and drive progress.
For Research or Industrial Raw Materials, Not For Personal Medical Use!
|
There is no product in your cart. |
Eata 3DPrint: Your innovation partner for advanced 3D printing solutions, delivering cutting-edge services and materials to transform industries and drive progress.
Enter your E-mail and receive the latest news from us.
