Carbon Fiber Reinforced Composite BPP

Cat No:FCSM-0019

Description

A lightweight, thin-wall bipolar plate manufactured from carbon-fiber-reinforced resin, offering a balance of high mechanical toughness and low contact resistance.

Datasheet

Inquiry

Basic Information

Material Composition	Carbon Fiber / Phenolic Resin
Thickness (μm)	800
Density (g/cm³)	1.8
Surface Resistance (mΩ·cm²)	< 10
Tensile Strength (MPa)	60
Thermal Conductivity (W/m·K)	30
Porosity (%)	< 0.2
Operating Temp Max (°C)	160
Flexural Strength (MPa)	85
Corrosion Resistance (μA/cm²)	< 1.5
Contact Angle (°)	92
Gas Permeability (cm³/cm²·s)	< 10⁻⁸
Coefficient of Thermal Expansion (10⁻⁶/K)	8
Shore Hardness	85 (Shore D)
Water Uptake (%)	< 0.5
Ash Content (%)	< 0.1
Mean Pore Size (μm)	N/A
Compressive Strength (MPa)	150
Electrical Conductivity (S/cm)	180
Specific Surface Area (m²/g)	N/A
Young's Modulus (GPa)	18
Chemical Stability	High Acid Res
Coating Material	Graphite Coating
Surface Roughness (Ra)	0.6

GET IT!

Eata Battery is the single source for every high-performance material in next-gen batteries—from cathode powders to current collectors, catalysts to membranes. We de-risk your supply chain so you can scale faster.

For Research or Industrial Raw Materials, Not For Personal Medical Use!