Carbon Fiber Reinforced PEEK Plate

Cat No:FCSM-0100

Description

High-strength thermoplastic composite plate made from PEEK reinforced with carbon fibers, used for lightweight, high-temperature structural frames.

Datasheet

Inquiry

Basic Information

Material Composition	PEEK / 30% CF
Thickness (μm)	2000
Density (g/cm³)	1.45
Surface Resistance (mΩ·cm²)	< 50
Tensile Strength (MPa)	250
Thermal Conductivity (W/m·K)	1.5
Operating Temp Max (°C)	260
Flexural Strength (MPa)	320
Corrosion Resistance (μA/cm²)	Excellent
Contact Angle (°)	82
Coefficient of Thermal Expansion (10⁻⁶/K)	15
Shore Hardness	85 (Shore D)
Water Uptake (%)	< 0.1
Ash Content (%)	30 (Fiber)
Mean Pore Size (μm)	N/A
Compressive Strength (MPa)	180
Electrical Conductivity (S/cm)	15
Specific Surface Area (m²/g)	5
Young's Modulus (GPa)	22
Chemical Stability	Hydrolysis Res
Coating Material	None
Surface Roughness (Ra)	0.4

GET IT!

Eata Battery is the single source for every high-performance material in next-gen batteries—from cathode powders to current collectors, catalysts to membranes. We de-risk your supply chain so you can scale faster.

For Research or Industrial Raw Materials, Not For Personal Medical Use!