Injection Molded Graphite Composite Plate

Cat No:FCSM-0010

Description

A cost-effective composite bipolar plate made via injection molding, designed for high-volume production with integrated flow channels.

Datasheet

Inquiry

Basic Information

Material Composition	Graphite / Thermoplastic Polymer
Thickness (μm)	2000
Density (g/cm³)	1.85
Surface Resistance (mΩ·cm²)	< 12
Tensile Strength (MPa)	35
Thermal Conductivity (W/m·K)	25
Porosity (%)	< 0.5
Operating Temp Max (°C)	150
Flexural Strength (MPa)	55
Corrosion Resistance (μA/cm²)	< 2
Contact Angle (°)	90
Gas Permeability (cm³/cm²·s)	< 10⁻⁸
Coefficient of Thermal Expansion (10⁻⁶/K)	15
Shore Hardness	75 (Shore D)
Water Uptake (%)	< 0.8
Ash Content (%)	< 0.2
Mean Pore Size (μm)	N/A
Compressive Strength (MPa)	100
Electrical Conductivity (S/cm)	120
Specific Surface Area (m²/g)	N/A
Young's Modulus (GPa)	8
Chemical Stability	Good
Coating Material	None
Surface Roughness (Ra)	1.5

GET IT!

Eata Battery is the single source for every high-performance material in next-gen batteries—from cathode powders to current collectors, catalysts to membranes. We de-risk your supply chain so you can scale faster.

For Research or Industrial Raw Materials, Not For Personal Medical Use!