Liquid Form-In-Place Gasket (FIPG)

Cat No:FCSM-0027

Description

A two-component, low-viscosity silicone sealant designed for high-speed automated dispensing directly onto bipolar plates for precision fuel cell sealing.

Datasheet

Inquiry

Basic Information

Material Composition	Two-part Silicone
Thickness (μm)	400
Density (g/cm³)	1.1
Surface Resistance (mΩ·cm²)	Insulator
Tensile Strength (MPa)	5
Thermal Conductivity (W/m·K)	0.2
Operating Temp Max (°C)	200
Flexural Strength (MPa)	N/A
Corrosion Resistance (μA/cm²)	Excellent
Contact Angle (°)	100
Gas Permeability (cm³/cm²·s)	< 5x10⁻⁸
Coefficient of Thermal Expansion (10⁻⁶/K)	250
Shore Hardness	40 (Shore A)
Water Uptake (%)	< 0.2
Ash Content (%)	< 0.1
Mean Pore Size (μm)	N/A
Compressive Strength (MPa)	2 (at 25%)
Electrical Conductivity (S/cm)	< 10⁻¹²
Specific Surface Area (m²/g)	N/A
Young's Modulus (GPa)	0.005
Chemical Stability	Hydrolysis Resistant
Coating Material	None
Surface Roughness (Ra)	0.5

GET IT!

Eata Battery is the single source for every high-performance material in next-gen batteries—from cathode powders to current collectors, catalysts to membranes. We de-risk your supply chain so you can scale faster.

For Research or Industrial Raw Materials, Not For Personal Medical Use!