Lithium-Rich Manganese-Based Layered Oxide Cathode Material

Cat No:BMSPEM-0396

Description

This lithium-rich manganese-based layered oxide cathode material from Eata Battery is a solid solution cathode capable of a specific capacity of 250 mAh/g or more over 2-4.8 V with good cycle performance. Specifications: D10 4.90 um, D50 9.40 um and D90 16.8 um; BET 0.70 m2/g; tap density 2.00 g/cm3; gram capacity 200 mAh/g measured on coin cells at 25 degrees C, 0.1C over 3.0-4.6 V; pH 10.86. Component detection shows Fe ~0.0032%, Cu ~0.0000%, Mg ~0.0129%, Ga ~0.0099% and moisture ~0.0335%. The material offers excellent processing performance, is in commercial mass production with stable quality, and is mainly built on inexpensive manganese with low precious-metal content. It suits power tools, tablet PCs, electronic toys, electric vehicles and energy storage products, and is convenient for pouch cell and coin cell research. Rate testing is performed at 25 degrees C with constant-current charge to 4.8 V and discharge to 3.0 V at 0.1C-3C; cycle testing uses 0.5C charge to 4.8 V and 1C discharge to 3.0 V.

Datasheet

Inquiry

Basic Information

Storage Conditions	Store at room temperature, dry and sealed
Primary Application	High-capacity cathode active material for power tools, consumer electronics, electric vehicles and energy storage
Shipping Conditions	Ships at ambient temperature

GET IT!

Eata Battery is the single source for every high-performance material in next-gen batteries—from cathode powders to current collectors, catalysts to membranes. We de-risk your supply chain so you can scale faster.

For Research or Industrial Raw Materials, Not For Personal Medical Use!